راتنج إيبوكسي AB سعة 1 جالون is a ISO 9001-certified epoxy & uv resin manufactured by Desay. Key specs: CAS No. 38891-59-7, Mixing Ratio A:B = 1:1, Appearance Transparent.
راتنج إيبوكسي AB سعة 1 جالون
ISO 9001
راتنج إيبوكسي AB شفاف بنسبة خلط 1:1 للحرف اليدوية والمجوهرات وطاولات النهر
المواصفات التقنية
| CAS No. | 38891-59-7 |
| Mixing Ratio | A:B = 1:1 |
| Appearance | Transparent |
| Viscosity | 3,500-4,500 cps |
| Volume | 1 gallon/set |
| Self-leveling | Yes |
| Shelf Life | 12 months |
| OEM | Available |
مختصو المواد اللاصقة يردون خلال 24 ساعة.
الميزات الرئيسية
- Crystal-clear transparency with no yellowing
- Self-leveling formula for smooth finish
- Easy 1:1 mixing ratio — no complex calculations
- OEM/private label available
التطبيقات
- DIY handicrafts
- Jewelry making
- River tables
- Art coating
- Mold casting
Frequently Asked Questions
What is the راتنج إيبوكسي AB سعة 1 جالون used for?
The راتنج إيبوكسي AB سعة 1 جالون by Desay is designed for diy handicrafts, jewelry making, river tables. راتنج إيبوكسي AB شفاف بنسبة خلط 1:1 للحرف اليدوية والمجوهرات وطاولات النهر
What are the specifications of the راتنج إيبوكسي AB سعة 1 جالون?
CAS No.: 38891-59-7. Mixing Ratio: A:B = 1:1. Appearance: Transparent. Viscosity: 3,500-4,500 cps. Volume: 1 gallon/set. Self-leveling: Yes. Shelf Life: 12 months. OEM: Available.
Does the راتنج إيبوكسي AB سعة 1 جالون come with certifications?
Yes, the راتنج إيبوكسي AB سعة 1 جالون is ISO 9001 certified.
How can I get a quote for the راتنج إيبوكسي AB سعة 1 جالون?
Use the inquiry form on this page, or contact us at jack@desaiglue.com. We respond within 24 hours.
What is the correct mixing ratio for AB epoxy resin?
This epoxy resin uses a 1:1 mixing ratio by volume (Part A resin to Part B hardener). Measure both components carefully using graduated mixing cups. Inaccurate ratios are the number one cause of tacky, under-cured finishes. Mix thoroughly for 3-5 minutes, scraping the sides and bottom of the container. If bubbles form during mixing, let the mixed resin rest for 5-10 minutes or use a heat gun at low setting held 15-20 cm above the surface.
How do I test if epoxy resin has cured properly?
Press a fingernail firmly into the cured surface after 24 hours. A properly cured epoxy leaves no mark and feels completely hard. If the surface dents or feels rubbery, the resin is under-cured — usually caused by incorrect A:B ratio, insufficient mixing, or ambient temperature below 20 degrees C during cure. Under-cured epoxy cannot be fixed by adding more hardener on top; the entire piece must be discarded. For production environments, use standardised hardness testing (Shore D) to verify cure.
Get a Quote for راتنج إيبوكسي AB سعة 1 جالون
We'll respond within 24 hours with pricing and technical details.
